The Linksys RE6500 extender will help you to extend the range of the router’s WiFi signals. Linksys RE6500 extender consists of the 2.4GHz and 5GHz dual frequency bands. With the help of a dual-frequency band, you can enjoy fast internet speed in all directions. Study the lower directions to do the RE6500 extender login and setup. 

Benefits Of RE6500 Extender 

• Quickly boost the WiFi signal range of the existing router. 
• Connect with any type of existing router. 
• The WiFi-protected setup button of the Linksys RE6500 extender helps to connect the extender to the router. 
• Quickly do the login and configuration process. 
• Tiny in size but supports several functions. 

Access The Linksys RE6500 Extender Login Page 

• First, locate the RE6500 extender power plug in the power socket or wall plug. 
• After that, grab the WiFi unit such as a laptop or computer, and connect to the Linksys extender network. 
• Later, open the navigation and type extender.linksys.com in the address bar. 
• Now, the Linksys extender login page opens on your computer display. 
• Enter the default login details of the extender.
• Follow the display instructions shown on the screen. 
• In the end, tap on the login button to complete the Linksys RE6500 extender login process. 

Fix Linksys RE6500 Extender Login Troubles 

• Make sure that the computer and extender must be connected to each other. 
• Verify the LED status of the Linksys RE6500 WiFi range extender. 
• Try to turn on/off the Linksys RE6500 extender. 
• Must use the default web address of the Linksys RE6500 extender. 

Attach Extender To Router Through WPS Button 

To begin this method, make sure your router must support the WPS button. If the router does not support this WPS button then try another method to pair the extender with the router. https://candybird.net/

• First, make sure that the router must be placed closer to the extender. 
• Now, press the WPS button of the Linksys RE6500 extender. 
• Next, inside in 20 seconds press the existing router WPS button. 
• Later, the WPS LED starts blinking solid which means the Linksys RE6500 setup is done.. 
• In the end, locate an extender in that location where you want to enjoy the fast internet speed. 

Configure By Access Point Mode

If you fail to connect the extender to the router via the WPS method then try this AP mode for the Linksys WiFi extender setup. 

• To start with, fix the Linksys extender power plug into the socket. 
• Now, attach the Linksys RE6500 extender to the main router LAN port by an ethernet cable. 
• Next, to the Linksys WiFi range extender network attach a WiFi gadget. 
• Later, launch the browser on a connected WiFi gadget, and in the URL bar type the default web address. 
• Further, create a network name and password, for the access point mode. 
• Finally, consider all the display directions. 

After doing the Linksys WiFi extender setup if you are facing an issue then consider below solution tips. 

Resolve Issues Of Linksys RE6500 Extender 

There are so many solution tips to fix the issues of the Linksys RE6500 extender. Consider all the solution tips one by one. 

Linksys RE6500 Extender Router And Placement 

The placement of the extender and router plays an important role. If your extender is placed near metal or electronic gadgets then immediately change the router placement because metal appliances absorb all the WiFi signals which come from the extender and router gadgets. The central location of your house and office is best. 

Kick-Off Extra WiFi Containing Device 

We recommend you kick off all those WiFi devices which are not in use. If you don’t know how many WiFi gadgets connect with the extender network then go to the Linksys extender setup by a web portal and look for the WiFi gadgets connected option and remove those gadgets which are not in use. 

Enhance Linksys RE6500 Extender Performance 

Due to the outdated software of the extender, you can also face issues. To fix the issue we recommend you update the software of the Linksys extender from time to time without any delay. Consider the below steps to update the software.

To enhance performance, visit the Linksys extender web management page. Then search administration and later click software upgrade. Now, download the latest software file if anyone is available. For further installation, you will require to restart your extender. 

Reset Linksys RE6500 Extender

At the back of the RE6500 extender, you see the reset hole button. Push that button for 10 seconds with a paperclip. All the extender LEDs are now turned off. By doing this the Linksys RE6500 extender is reset now. 

Note: After resetting Linksys extender settings, do the Linksys RE6500 setup process again.

After the entire study of this post, you will be able to do the login and configuration process of the Linksys RE6500 extender. In case you are having any other device of Linksys such as a Velop device and you are finding the configuration’s direction then visit the Linksys Velop setup page and consider all the display instructions.